Optimized for static pressure

During the development of the BioniX P120, special emphasis was placed on a focused airstream and thus a high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance. Therefore, the BioniX P120 is particularly suitable for use on heatsinks and radiators.

More efficient technology

The motor is powered by a Neodym-Iron-Boron-Magnet ring of the newest generation, which allows the BioniX P120 to run much more efficiently than its predecessors. This saves energy and lowers the coil temperature without compromising the performance.

Maximum quietness, minimum vibration

Even at low speeds the operating sound of the ARCTIC motor is barely noticeable. Due to a sinus-magnetizing the motor only creates about 5 % of the vibration from commutation of a regular DC-motor without filter. Consequently, there is no need for rubber spacers due to the steady and smooth torque of the motor.

Extended life span

A 10 °C lower motor temperature roughly doubles the life span of a fan. The ARCTIC motor has a four times longer service life through its low coil temperature.

200 to 2100 RPM regulated via PWM PST

With a wide range of regulation and the PWM Sharing Technology (PST), the BioniX P120 fan speed can be controlled synchronously with all your other fans together. This keeps noise at a minimum while guaranteeing maximum cooling performance when needed.

0 dB Mode

The BioniX P120 is able to switch into silent passive mode when the PWM signal is below 5 % due to the motor. This allows working at your PC in complete silence without any unwanted noise.

High quality bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced and greater efficiency is achieved. As a result, there is less heat development as well as less bearing noise, which means you can enjoy a longer service life from your fan.

ARCTIC BioniX P120 - Case fan - 120 mm - white

ARCTIC - Arvutiventilaatorid - BioniX P120